 |
IDEAL
CONTACT Pattern is spread evenly over tooth's profile with
concentration nearer toe than heel. |
|
 |
COMPETITION
CONTACT Pattern concentrated just up from the toe covering
1/3 to 1/2 of the tooth. |
|
 |
HIGH
CONTACT Pattern is concentrated at the crown of the drive
gear tooth. |
Move
the pinion deeper in towards the differential carrier (add pinion shim). |
 |
LOW
CONTACT Pattern is concentrated in the root of the drive
gear tooth. |
Move
the pinion out away from the differential carrier (subtract pinion shim). |
 |
HEEL
CONTACT Pattern is concentrated off the heel end of the drive
gear tooth. |
Move
the ring gear closer to the pinion (decrease backlash) while maintaining
minimum backlash. |
 |
TOE
CONTACT Pattern
is concentrated off the toe end of the drive gear tooth. |
Move
the ring gear away from the pinion (increase backlash) while maintaining
minimum backlash. |
Tooth
Contact |
Condition |
Remedy |
About Reider Racing
·Corporate History
·Meet Team Reider
·Careers @ Reider
·Corporate Racing
·Media Relations
·Contact
About Our Company Corporate History Careers At Reider Media Relations Awards & Sponsorships Contact
About Our Company Corporate History Careers At Reider Media Relations Awards & Sponsorships Contact
.
